1. Clean Cabinets. Put on a pair of rubber gloves and wipecabinet faces with a damp rag to remove surface dirt.
  2. Sand Edges. Using a sanding block wrapped in 80-grit sandpaper,sand raised edges and corners of each cabinet door and/oropening.
  3. Apply Antiquing Glaze.
  4. Smooth Finish.
  5. Darken Edges.
  6. Remove Excess Glaze.

.

Correspondingly, how do you antique paint cabinets?

How to Paint Kitchen Cabinets to Look Antique

  1. Deciding The Base Color:
  2. Choosing The Antique Stain Color:
  3. Clean The Cabinet:
  4. Prep the doors.
  5. Clean – Dampen some cotton rags and wipe the cabinetfaces to remove any surface dirt.
  6. Sand – Smooth down the cabinet surface until the woodunderneath looks dull.
  7. Sanding The Edges:
  8. Paint The Base Color:

Similarly, how do you apply glaze to cabinets? Glaze STEPS:

  1. Clean cabinets very well and remove hardware.
  2. If you purchased the clear glaze in order to custom mix yourown color do that first.
  3. Apply the glaze with a sponge brush.
  4. Paint the glaze on a few cabinet doors or drawers at atime.
  5. Go back with a damp (NOT wet) cloth and remove all of theexcess glaze.

Also asked, how do you distress wood cabinets?

Distressed Kitchen Cabinets: How To Distress YourKitchen

  1. Remove all of the cabinet hardware.
  2. Sand the cabinets with a sanding block.
  3. When all of the sanding is done, clean clean clean.
  4. Bust out the antiquing glaze.
  5. Apply a top coat.
  6. Let the topcoat dry for about 24 hours before you add yourhardware.

How do you make antique glaze?

Add a small amount of antiquing glaze to asmooth, clean rag. Begin applying the glaze to the front orside of one cabinet in small, circular motions until you've coveredthe entire section. Tip: A small amount of glaze will go avery long way. It's better to start with too little glazerather than too much.

Related Question Answers

How do you make paint look distressed?

How to do it
  1. Step 1 Prep the Surface. Place your piece on top of a dropcloth and lightly sand the wood to create a rough surface.
  2. Step 2 Apply Base Paint. Using your darkest shade of paint,apply a first coat to the furniture.
  3. Step 3 Create a Paint Wash.
  4. Step 4 Apply Top Layer.
  5. Step 5 Distress Edges.

How do you make paint look antique?

The Process
  1. Apply one coat of your underlying color.
  2. Let dry for about two hours.
  3. Lightly sand the dried paint.
  4. Apply one coat of the top color and let dry overnight.
  5. Wet your rag in a bucket of water and wring it out completelyso that it is just damp.
  6. Rub the rag over areas you'd like to distress.

What is glazing on kitchen cabinets?

Glazed Kitchen Cabinets. Glaze is atransparent or semi-transparent coating that is applied after acabinet has been painted or stained. Glazing kitchencabinets adds depth and color to the finish and often beats thecost to paint cabinets.

How do you make wood look distressed?

  1. Prepare Your Space. Start by laying down drop cloths andpreparing the area.
  2. Sand and Clean the Piece. Sand the surface of the piece.
  3. Paint the Piece.
  4. Apply Wax and Top Layer of Paint (Optional)
  5. Distress the Piece with Sandpaper and Steel Wool.
  6. Apply a Stain (Optional)
  7. Protect the Finished Piece with Polyurethane.

How do I paint vintage wood?

How to do it
  1. Step 1 Prep the Surface. Place your piece on top of a dropcloth and lightly sand the wood to create a rough surface.
  2. Step 2 Apply Base Paint. Using your darkest shade of paint,apply a first coat to the furniture.
  3. Step 3 Create a Paint Wash.
  4. Step 4 Apply Top Layer.
  5. Step 5 Distress Edges.

How do you repaint kitchen cabinets?

Table of Contents
  1. Step 1: Remove Cabinet Doors and Drawers.
  2. Step 2: Clean the Cabinets.
  3. Step 3: Repair Holes, Dents or Gouges.
  4. Step 4: Sand Then Clean the Surfaces.
  5. Step 5: Apply the Primer.
  6. Step 6: Apply Semi-Gloss Latex Paint.
  7. Step 7: Mark the Placement of the Hardware.
  8. Step 8: Pre-Drill Then Attach Hardware.

What is milk paint used for?

It has also been used for many years onfurniture, walls, barns, and more. Milk Paint is a versatilepaint that can be used to achieve a variety of looksfrom chippy and distressed to smooth and sleek. Milk Paintis suitable for both interior and exterior applications and isnaturally mold resistant.

How do I paint shabby chic?

If it's varnished, use sandpaper or a good qualitypaint and varnish remover. Apply a coat of water-basedacrylic primer – This simply gives your furniture a smootherfinish, making it easier to work on. Because it's a shabbychic project, you don't need to be neat. Even if you're rubbishat painting, you'll be fine.

How do you whitewash cabinets?

Follow this step-by-step guide to make the project go assmoothly as possible.
  1. Step 1 - Remove the Doors. Taking off the cabinet doors willmake removing the old stain and applying the whitewash mucheasier.
  2. Step 2 - Clean.
  3. Step 3 - Strip the Cabinets Down.
  4. Step 4 - Paint.
  5. Step 5 - Whitewash It.
  6. Step 6 - Hang the Cabinets.

Can you distress laminate furniture?

A piece of laminate furniture that has alreadybeen painted is ready to go when it comes to giving it adistressed appearance, as you won't need to prime itor give it a base coat. Achieve a distressed look withadditional paint plus faux finishing techniques andsupplies.

How do you paint laminate cabinets?

  1. Clean the laminate surfaces and prepare to paint. Before youstart painting, give all the surfaces a good wipe down with a clothand a laminate cleaner.
  2. Prime the surface with laminate primer.
  3. Lightly sand the primed laminate surface.
  4. Apply topcoat to laminate surface.

What is chalk paint?

Chalk Paint is a type of paint (actually,it's a trademarked brand of paint by Annie Sloan, but othercompanies have similar paints also) that can be used onfurniture and other items to create a chalky appearance. It's usedfor creating an aged appearance, and can be distressedeasily.

What is antiquing glaze?

Antiquing consists of a glaze applied overa base finish; the first step is applying an enamel base coat tothe wood. Antiquing is the technique of glazing a basefinish to simulate age or create an interesting coloreffect.

How do you make wood look old with vinegar?

Here's how to age wood and make it lookold and gray. Iron vinegar on fresh cedar lumber: Soaksome steel wool in white vinegar for a few hours or a fewdays – the longer it steeps, the darker the aged effect willbe. Fill the jar with the steel wool and vinegar, themeasurements don't have to be precise.

How do you make wood look old and gray?

To age new wood to a natural silvery gray,to grey-brown or black patina (depending on thewood), let a small piece of steel wool (or a fewnon-galvanized nails) sit overnight in ordinary white vinegar, thendilute the vinegar solution 1 to 1 with water.

How do you make wood look rustic with stain?

1: Apply a liberal coat of Black Water Based WoodStain with a foam brush. 2: Work the stain into thegrain with a cloth, then wipe off the excess. 3: We sand the wetWood Stain immediately, but you can let it dry for easiersanding. Sand off the stain with 150-grit, then 220-gritsandpaper.

What sandpaper do you use to distress furniture?

We used 220 grit fine sandpaper to scratchup the surface of the whole piece of furniture, to sand outthe sheen from the satin paint. Then, we went around theedges and quickly rubbed them with the fine sandpaper toexpose the white paint and the raw wood underneath.

How do you use baking soda to weather wood?

Mix equal parts water and baking soda in anyavailable plastic container, enough to apply it thickly over yourwood. Cover the wood with thick coats of thebaking soda paste using a standard paintbrush, then leavethe wood in the sun to dry for at least sixhours.

How do you whitewash wood?

Mix up 1 part water to 2 parts flat white latex paint(we used budget ceiling paint from our local hardware store). Brush(don't roll) the paint on in the direction of the woodgrain. Wipe off with a paper towel or rag in the direction of thewood grain. Repeat steps 3 and 4 if desired.