The Cost. Hardie board siding runs about $0.70 to $5.25 per square foot. This could lead to a total cost of anywhere from $4,700 to $13,300. Why such a huge flux in the price range?

.

Simply so, how much does it cost to have Hardie siding installed?

On average Hardie board siding costs $10 per square foot. For a 1,200 square foot exterior wall it would cost around $12,000 to install. However, it may be the last siding you install on the home in your lifetime, so it's a smart choice for nearly any homeowner.

Also Know, how much does it cost to reside a house with fiber cement? Cost. On average, you can expect to pay anywhere from $7.50 to $13.50 per square foot or $750 to $1,350 per square to install fiber cement siding on a typical house. A square is equal to 100 square feet.

Accordingly, does Hardie board increase value of home?

James Hardie siding will not only give your home a whole new look and feel; it will also significantly increase its value, as it has consistently been ranked one of the top projects with the highest return on investment by Remodeler Magazine's Cost vs. Value report.

Does fiber cement siding increase home value?

Fiber Cement Sliding is a Value Raise One way to instantly increase your home's value is to add fiber cement siding. Adding fiber cement siding to your home adds to the curb side appeal, as well as keeping a lid on energy costs.

Related Question Answers

How long does Hardie board last?

50 years

Is Hardie board cheaper than brick?

At face value, fiber-cement siding appears to cost less than brick. When maintenance and painting are factored into construction costs, however, brick becomes a much better value for homeowners and builders. Brick is naturally insect- and moisture-resistant. The same cannot be said of wood and fiber- cement siding.

How much does it cost to side a 1500 sq ft house?

Siding Cost The average cost to side a house ranges from $4,300 to $15,700, or $3 to $11 per square foot depending on the size of home and materials used. Vinyl siding prices average $7,100 for a 2,000 square foot home.

How often does hardiplank need painting?

If I remember correctly, it's every 3-5 years or so. It pretty much depends on how much weather or sun it gets. That's the part of hardiplank I don't like. Hardboard/Masonite is the 3 to 5 year paint cycle siding.

How do I estimate the cost of siding?

How to Estimate Siding Costs by Home Square Footage. To get an estimate for siding pricing purposes the calculation is – wall lengths multiplied by the height of the house. For example, take a two-story home that is 25-feet by 45-feet (2,250 square feet of flooring) with an exterior of 2,800 square feet.

Can hardiplank be installed over existing siding?

According to the best practices manual from James Hardie, existing siding can be used as a substrate as long as it is in good condition, meaning that it is not warped, bowed, curling, delaminated, or rotting. If none of these potential problems are present, the existing siding is probably fine to use as the substrate.

Does HardiPlank need to be painted?

Painting: Hardie board siding is known to retain paint longer than wood. Because it is moisture-resistant, it never swells or rots so the paint never peels, chips or cracks. Selection: If you want to select your own personal paint color, hardie plank can come pre-primed for easy application.

Can you pressure wash Hardie board siding?

Wash down the exterior surfaces of your siding every 6 to 12 months with a garden hose or low pressure water spray to remove dirt and debris. James Hardie Products with ColorPlus® Technology can be cleaned using water and a soft brush or rag.

What color siding has the best resale value?

Here are some of the siding colors that offer the best resale value for your home: Shades of blue: the best shades of blue are on both ends of the color.

Here are a few shades to avoid when picking a color for your home's exterior:

  • Orange.
  • Bright Blue.
  • Purple.
  • Pink.
  • Mustard yellow.

Is Hardie board expensive?

Cost. There is no doubt about it, the advantages of hardie board come with a cost. Vinyl siding is far less expensive, both in terms of the product itself and labor costs to install it.

Does siding increase home value?

Value Report, a midsize vinyl siding remodel will increase your home's value by 78.2 percent of the project's cost. The report estimates that a midsize vinyl replacement job will cost $11,475, and has a resale value of $8,975.

How much does it cost to replace siding with Hardie board?

Hardie board siding runs about $0.70 to $5.25 per square foot. This could lead to a total cost of anywhere from $4,700 to $13,300. Why such a huge flux in the price range? You have to consider the amount of siding you'll need, how long it will take and any additional fees for equipment and materials.

What is the best siding material for a house?

Exterior Siding Options for Your Home
  • Brick Siding. Brick exterior siding is the most traditional option for homeowners.
  • Engineered Wood.
  • Fiber-Cement Siding.
  • Glass.
  • Metal Siding.
  • Stone Siding.
  • Stucco Siding.
  • Vinyl Siding.

How much does it cost to side a 1600 sq ft house?

The average cost to install vinyl siding on a 1,600 sq. ft. home is $4,800–$5,600, or $3.30 per square foot installed depending on the size of your home, quality of siding, and the number of accent pieces. Higher-quality siding on the same house will cost between $10,200 and $11,100 or $6.70 per square foot.

How much does it cost to side a house with cement board?

Cost of Cement Board Siding
Cement Board Siding Costs Zip Code Sq. ft.
Basic Better
Cement Board Siding – Installation Cost $252.00 - $384.00 $360.00 - $516.00
Cement Board Siding – Total $372.00 - $576.00 $528.00 - $768.00
Cement Board Siding – Total Average Cost per square foot $3.95 $5.40

Does Hardie board increase value of home?

Why Installing James Hardie Siding Improves Home Value There are many reasons why James Hardie Siding will increase your home's value. It will boost your curb appeal with a wide variety of colors that will remain crisp and won't fade. Hardie siding will remain durable. It won't chip or crack.

How do you nail hardiplank siding?

Fiber cement siding can be nailed by hand or with a pneumatic nailer. It can also be attached using corrosion resistant screws. Use hot-dipped galvanized or stainless steel nails. Nails should penetrate through the sheathing and at least 1” into studs.

What nails do you use for Hardie siding?

NAIL TYPE: Fasteners must be corrosion resistant, galvanized or stainless steel. Electro-galvanized nails are acceptable for use with James Hardie Siding Products, but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails.